Product Product description: Ready Mixed Concrete C20/25 SCC for passive environment with CEM II/B-M 52,5 N LA cement and class P aggregates. This specific product EPD covers all slump-flows and Dmax variants of this type without pozzolans. Fibres and pigments are not included. The EPD is based on data from all IBF Ready Mix Concrete production sites in Denmark, and is therefore applicable for this product produced at these sites. Product specification For further information, see https.//www.ibf.dk/ The values in the table below have been declared to nearest whole number. Materials Binder Aggregates Additives Water Value 13 81 < 0,3 6 Unit Weight-% Weight-% Weight-% Weight-% Technical data: The concrete are produced and delivered according to EN 206 and DS 206. Strength class: C20/25 Exposure classes: X0, XC1 Slump flow: 550 - 650 mm Dmax: 8 mm, 16 mm and 32 mm Coarse aggregates: Class P Density: 2196 kg/m3 Market: Denmark, average distance of 25 km Reference ser vice life, product Reference service lifetime, product is calculated as 100 years (RSL) cf. Annex AA in EN 16757:2017, Sustainability of construction works - Environmental product declarations - Product Category Rules for concrete and concrete elements. Reference ser vice life, building or construction works Reference service lifetime: the building is declarered as 50 years, as this is the chosen as the reference period for depreciation in Denmark. LCA: Calculation rules Declared unit: 1 m3 Ready mixed concrete C20/25 SCC CEM II/B-M (X0, XC1) with class P aggregates Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. A1 - A3 data is based on 2024 data. The EPD is calculated with a cement-EPD based on the net-approach. Net-approach means that the CO2 from the use of secondary fuels are not included. 3 / 12
Download PDF fil